Furniture spring moisture-proof method

There is more rain in spring, and furniture is essential for moisture protection. And some valuable furniture, if not well maintained in the spring, can seriously dampen their life expectancy, especially leather, solid wood, fabric, metal, rattan and other materials furniture is "the focus of disaster."

Leather furniture: desiccant dehumidification

Symptoms of resurgence: Leather leather leather will be cold and hard after resurgence, and mildew will appear on some less ventilated surfaces, even after moisture, it will easily lead to deformation or faded leather surface.

Coping with small coups: It is best to apply special oyster sauce, lanolin, leather oil, etc. to the surface after dust removal. The surface moisture can be wiped off with a soft dry cloth, and the mildew can be removed with a mildew remover and then coated with leather maintenance oil; for leather sofas, consider placing some desiccant to keep it dry. - Solid wood furniture: use moisture-absorbing paper to protect the surface from moisture

Symptoms of resurgence: Today, many solid wood furniture undergo strict drying procedures before leaving the factory, but this does not mean that moisture-proof care can be performed infrequently.

Coping with small coups: solid wood furniture should be maintained with special cleaning agent. It can be evenly applied to the surface of the furniture with protective wax or special cleaning agent, and then wipe it gently; or use absorbent paper to protect the surface of the furniture from moisture; The edge of the furniture is not good or damp. It is easy to absorb water and cause the furniture board to expand and damage. Pay attention to waterproof when using it. Install a waterproof pad under the furniture leg that is easy to absorb water. Keep the ventilation distance near the wall of the outer wall and the bathroom.

Cloth sofa: water absorbent sofa towel is better

Moxibustion symptoms: moist, easy to get ash, sticky together easier to get dirty.

Coping with small coups: Fabric sofas should use a special vacuum cleaner to absorb the dust on the surface. It is best to use a sofa towel with good water absorption and clean it frequently. - Metal furniture: dry rag, rubbing rust remover

Symptoms of resurgence: Corrosion of metal handrails or feet, especially the surface of iron furniture is faded and spots appear.

Coping with small tricks: Metal furniture should always be scrubbed with tarpaulin and mild detergent. Try not to use it in a humid environment, and pay attention to waterproof and moisture-proof. If it is wet, it is best to use a dry rag to clean it. If rust is present, use a dish cloth or toothbrush to remove the rust inhibitor, and then use a dry cloth to polish; if it is wrought iron furniture, if it is found to have rust spots, it should be replenished in time. If it is found that there is condensation on the surface, use a dry cloth in time. Wipe to prevent rust.

Rattan furniture: do not ventilate it

Symptoms of resurgence: Rattan furniture can absorb a certain amount of water, but if it absorbs excess water, it will become soft, loose structure and drooping plane.

Coping with small coups: Rattan furniture rattan is prone to mold and mold, and should be cleaned frequently. Ventilation must be done well, but do not expose it to sunburn after washing to prevent deformation or breakage. Wang Wen M12〇 daily practical moisture-proof small objects

Absorbent box: used for local dehumidification, the moisture absorption box is more effective. It can be dehumidified in the closet, wardrobe, shoe cabinet and even the piano. Simply remove the moisture-absorbing box and put it into it. After a period of time, you can find more and more water in the bottom of the box. It disappears and it is very easy to use.

Anti-mildew and insect repellent: When selecting anti-insecticides, it is best to choose insecticides that are both insect-proof and mildew-proof. General supermarkets can be bought, convenient and practical.

Fresh-keeping bags: Some Chinese herbal medicines that are afraid of moisture or some foods can be sealed in fresh-keeping bags, so that they can also be protected from moisture. If it has been damp, it can be dried in a microwave oven and then sealed.

Soda powder: The soda powder available in the kitchen can absorb moisture. After agglomeration, it can be used as a cleaning agent, brushing the bathtub, sink, basin, etc., to degrease and mold, and the effect is quite good.

Coffee grounds: It has the dual effect of moisture absorption and deodorization. It is put into gauze bags, stockings or cotton socks, which is a convenient and easy to use small dehumidification bag.

Washing powder: Washing powder is also a good dehumidifier. Open a new boxed detergent (or pour the old one into the dehumidification box), poke a few holes in the plastic film and place it in any corner where dehumidification is required. After the washing powder is saturated with moisture, it can be taken to clean the clothes, and it is not wasted.

Candles: If you feel that the living room is too humid, the candle can also reduce the humidity of the living room air, so that the water vapor can not condense, thus reducing the indoor humidity. In addition, if there is a musty smell in the home, you can use aromatherapy candles containing natural plant fragrance oil, which can dry the air and remove the musty smell in the room.

Charcoal, bamboo charcoal: The surface voids of charcoal and bamboo charcoal can absorb water vapor and have a deodorizing effect, which is suitable for dehumidification in a small area. It can be dried and reused without harming the environment. Moisture absorption and deodorization have both aesthetic effects. Among them, the charcoal is a very easy-to-use moisture-proof product, which absorbs the odor through its porous characteristics and releases negative ions to improve the moisture and mildew of all kinds of closets.

Pvc Wood Door Machine

Pvc Door Making Machine,Wood Door Production Line,Pvc Wood Door Machine

Shansu Extrusion Equipment Co., Ltd. , http://www.plastics-extrusion.com

Posted on