[China Glass Net] In glass machinery, tempering furnace, edging, cleaning, hollowing, laminating and other equipment are all matured. The automatic glass cutting machine has been fast, high precision and difficult to control. It is considered that glass machinery looks simpler. In fact, it is more difficult to make glass machinery. Because domestic cutting machine manufacturing started late, market recognition is not high, and the consideration of equipment stability and precision, glass processing customers When choosing a fully automatic cutting machine, I don't know how to position and choose. Moreover, because of differences in foreign machinery and control levels, foreign brands have always dominated the field of high-end automatic glass cutting machines.
Today, with the rapid development of science and technology, with the rising labor costs, especially the accuracy requirements of customers for products, the requirements for safety, automation, product quality and efficiency are getting higher and higher. The work will be gradually replaced by automated sheet and glass cutters, and this trend has now slowly extended from large glass processing companies to small and medium-sized glass processing companies.
So how do you choose a glass cutter as a growing company?
Take the automated shaped glass cutting machine as an example. Pay attention to the following points when purchasing:
1. Selection: According to the actual cutting layout of the enterprise, choose the one that is more suitable for oneself, that is, what kind of glass is to be cut, that is, to consider the basis of the layout, do not wear big shoes with small feet, because it involves the normal wear and tear of the equipment and Unnecessary capital investment.
2. Cutting accuracy: According to your actual needs, this can not be seen directly from the introduction of the product manual and the manufacturer's words. At present, the technical parameters of most manufacturers are not true. Go to the site to see the actual demonstration and the actual use of the glass manufacturer.
3. Cutting speed: The cutting speed is a major performance of the cutting machine. Only when the overall performance and compatibility of the mechanical and control parts are good, the cutting machine can reach the corresponding speed, so no matter what the actual speed is needed. The speed of the cutting machine is a good standard for judging the performance of the cutting machine.
4. Automatic layout optimization function: The optimization of glass is an important guarantee for the high and low glass cutting rate. The one-time optimization of the computer may not achieve better results. The ability to perform secondary manual modification after optimization will be an important indicator for judging the advancement of an optimization system.
5. Mechanical part: The guarantee of stability and precision, first of all, the rationality of the design and installation of the mechanical part will be an important factor. To ensure the flatness of the mechanical part, the parallelism of the guide rails on both sides, how to prevent deformation, and whether the correction can be performed after deformation is an important part of the inspection of the mechanical part.
6. Function: The function of the cutting machine is also an important indicator to verify the performance of the cutting machine. Can you adjust the pressure automatically, can you have the special-shaped scanning function, can you have the lower knife limit function, and so on.
At present, there are nearly 10 manufacturers of automatic cutting machines in China, but there are not many manufacturers that can mature and quantify. When choosing a cutting machine, we must be cautious. We cannot simply look at the information and publicity, and we need to consider all aspects. This way you can not take a detour.
Seam Sealing Tape,Waterproof Seam Tape,3M Seam Sealer Tape,Seam Seal Waterproof
NEW POWER INDUSTRIAL Co., Ltd , https://www.newpowerhk.com