[China Glass Net] Hanging doors are also called hanging doors, sliding doors, moving doors, hanging doors, etc., according to the material and height are divided into hollow hanging doors, semi-automatic hanging doors, glass hanging doors, gravity hanging doors and so on. The more prominent features of the hanging door are the upper and lower rails. Let’s take a look at the precautions for loading the glass in the hanging door!
Precautions before work
1, the order to do two clear, two inspection, one clear: 1, clear door category (hanging door, ground rail sliding door), as well as door leaf size, materials, color, glass process requirements. 2. It is clear whether the flower is required when the glass is set. 3. Check whether the door leaf size, material color, glass process, etc. meet the production order requirements. 4, check the glass craft line, the grid is smooth, check whether there is loose loose phenomenon, whether there is stain inside the glass, garbage. 5. Distinguish the front and back of the glass.
2. Preparation: 1. Prepare the glass and door leaf to be set. 2. Prepare the tools you need.
Precautions during work
1. Glass installation: The two people cooperate to lift the required glass on the workbench. (Note: the tempered glass tempered logo is located at the upper left corner of the door leaf), and then find the corresponding door leaf frame according to the order to carry out the suit.
2, loading the horizontal head: find the corresponding door leaf cross-head for assembly (Note: If the lifting code, chute, pulley block in one, the door fan station has not been installed, in this process, according to the door category specific assembly) .
3, loading plate: method - right front left and rear, fixed (Note: If the platen has not been washed, you can find the corresponding mold according to the actual situation for the current ready to install).
4, install the handle.
5, plug transparent strips.
6, hit the glass glue (Note: this step can be placed before the finished product packaging according to the actual situation).
Precautions after work 1. Clean the garbage on the workbench and on the ground, and the tools should be returned.
2. Clean up all remaining accessories and return to place.
Hanging door process requirements
1. There must be a good flower or a strip between the door leaf and the door leaf, and the glass should not be reversed.
2. When pressing the transparent strip, it should be flattened, compacted, and free of looseness. The 45 degree joint must be matched.
3, the cross-head and the light enterprise connection position should be consistent, flat, without cutting hands.
Safety Precautions
1. When moving the glass door with the glass, the two people should cooperate with the handling according to the situation, and the hand position should be correct to prevent accidents from falling.
2, when the glass is set, it should be handled lightly to prevent the glass from breaking.
3. Care must be taken when screwing up.
Quick Dry Fabric,Polyester Quick Dry Fabric,Quick Dry Fiber Weaving Fabric,Moisture Transfer Knitting Fabric
Wujiang Bonheur Special Textile Co.,Ltd. , https://www.bonheurtex.com