[China Glass Network] Many car owners believe that as long as the car is attached to the film, you can leave it alone! Then you can run as you like! Actually, car foil can be counted as a car beauty project to some extent. However, many car owners report that the effect after filming does not match the effect of their own expectations or known, and will cause some doubts. So how to maintain the car film after filming?
1. Try to avoid car washing within three days after the film is applied, so as to prevent the film from falling off due to moisture. The rear window defogging line should not be opened as much as possible within one week. If the moisture is not dry, it will easily cause adverse effects on the demisting line. Wipe the membrane surface with a wet towel, sponge or soft cloth after applying. In addition, after a filming, it will be found that there is misty water vapor inside. This is the normal phenomenon of the solar film during the dry process, and it will slowly disappear after a while.
2, within a few days after the film should try to avoid lifting the window (especially the new car just past the film). It takes 5-7 days for the solar film to be fixedly attached to the window, so that the film edge is easily curled during the opening and closing of the window, and the film which is not completely bonded is also prone to displacement. High-quality car film usually has good wear resistance. The special high-performance resin glue is used between the film layers. The adhesion is very outstanding. When the film is applied, the edge of the film and the edge of the glass are only 2 mm. Moreover, the anti-scratch coating makes it highly scratch-resistant and has a long life and is easy to maintain.
3, the lift window in the week is also easy to wear the film surface, inferior film will appear scratch after a month or two, choose a good quality film to avoid this situation.
4. If you accidentally loosen the film during car wash, return to the professional film shop to re-fix the professional to ensure the effect and durability.
5. If there is stain on the film surface, do not use chemical solvent to wipe it. It is better to use a wet towel for cleaning, paper towel with water or cotton cloth to clean with detergent, or use a rubber wiper to clean it. However, avoid the use of abrasive objects and tools that can scratch or damage the film to avoid damage to the solar film.
Mens Cotton Casual Shirt,Men'S Casual Shirt,Mens Flannel Shirt,Mens Cotton Slubbed Shirt
Zhejiang Shaoxing Yongmei Import & Export Co., Ltd. , https://www.sxymgarment.com